Electric Fence Supplies Shipped Australia Wide

Snap Stay Electric Fence Insulators for Star Pickets-Pack of 25-Black

$15.50 Inc GST

Availability: In stock

Bainbridge SnapStay Electric Fence Insulators For Star Pickets benefits

  • Save hours a day when fitting insulators on long fences
  • Can be used on the reverse side of steel posts
  • 7 years UV protection
  • Can be used with Wire 2.5mm & 3.2mm, Cord and tape up to 40mm wide
  • Still usable if pin breaks off. Snap Claw grips star picket
  • Easy to remove a single item from the bag
  • Easily removed from post by hand (no pliers required)
  • Ideal for strip grazing, temporary fences or more permanent electric fences

Various ways to use Bainbridge Snapstay Electric Fence Insulators:

Snapstay insulators fitted to steel posts

    • Snapstay electric fence insulators are easily fitted to most size star pickets
    • The Snapstay insulators are very strong with the load taken by the two legs that snap onto steel posts.
    • A pin is available to stop vertical movement if required and is built to last as it doesnโ€™t take any horizontal load from impacts.

Snapstay insulators used with 2.5mm or 3.2mm electric fencing wire

    • Snapstay electric fence insulators are designed to accept wire by pushing it into the slot of the multi purpose head.
    • This is a simple process and can happen after the wire is tensioned or as the Snapstay insulators are fitted to each post.
    • The wire can be removed easily by pulling it out the same way but locks in place under normal conditions
    • A handy hint is to always push or pull the wire on a slight angle to help in passing the opening of the slot.

Snapstay insulators used with poly tape 12mm to 40mm wide

    • Snapstay electric fence insulators are designed to accept electric tape from 12mm to 40mm wide.
    • The tape is fed into the slot in the multipurpose head until it fits around the curved space in the head.
    • This is designed to ensure that the tape is not folded after fitting and will display its full width to horses or other animals.
    • The tape can be removed the same way or simply pulled through the insulator from the side.
    • If the tape is not under tension then the Snapstay insulator may not need the pin as friction in the legs may be sufficient to hold the insulator in place. This depends on the size of the steel posts used.
    • This is also true when reverse fitting the insulator to steel posts.

Snapstay insulators used with electric round twisted cord/rope

Snapstay electric fence insulators are designed to accept twisted electric cord. The cord is pushed into the slot provided or threaded through the curved space in the multi purpose head. The cord can be removed by pulling it through the slot or out of the curved space from the side. Other benefits are;

  • If the tape is not under tension then the Snapstay insulator may not need the pin as friction in the legs may be sufficient to hold the insulator in place. This depends on the size of the steel posts used.
  • This is also true when reverse fitting the insulator to steel posts.

Snapstay insulators reverse fit on steel posts

Snapstay electric fence insulators are easily fitted on the reverse side of steel posts. If CORD or TAPE is being used and no real tension is required the Snapstay Insulators will hold on to the reverse side of steel posts by pressure and friction. If wire is used under tension then it is advisable to wrap a short length of tie wire around the post and through the insulator slots in the legs and twitch it tight. This will hold the insulator firm for as long as required. Other benefits are;

  • The insulator head is further out from the steel post than a standard front of post fit.

Other uses including holding up tomato plants

Snapstay insulators have many other uses such as

  • Holding up Tomato plants
    • Tomato plants in long run production houses require a line that can be easily moved up to hold the branches as the plant grows. Snapstay insulators are ideal for this as they simply slide up the post as required and stay in position until the next movement
  • Attaching chicken wire to steel posts
    • Chicken mesh wire can be easily fitted in the slot anywhere on the mesh as required and fixed to a post at the required height.
Weight 0.5 kg
Dimensions 30 × 20 × 10 cm

Reviews

There are no reviews yet.

Be the first to review “Snap Stay Electric Fence Insulators for Star Pickets-Pack of 25-Black”

You may also like…

Shopping Cart
My List 0
Open My List Page Continue shopping
Scroll to Top